Remote starters are super convenient, so there is no wonder why you would want one in your automobile. No more sitting in a freezing car while you wait for your vehicle to warm up. You can do it from the inside of your home. How cool is that?
But if you don’t currently have a remote starter, you may be wondering, “How are remote starters installed”? Well, luckily for you we have the answers. In this guide, we’ll explain the steps to installing a remote starter.
Continuing reading below.
How Are Remote Car Starters Installed?
Remote starters must have a properly installed control module, wiring, and a bypass module to function correctly. The control module does all of the remote start operations by communicating with the car’s internal systems. The bypass module makes the remote starter work on up-to-date vehicles without needing to disable its factory security system.
Wiring connects the starter to the automobile so that everything functions properly. Lastly, the remote transmitter is what you would use to control all of the operations of the remote start system.
Each component of the remote start system connects and communicates with the control module to provide all of the remote start operations. The process works similar to a computer’s motherboard.
How Are Remore Starters Installed? The Basic Steps
You’ll have to determine where you place the primary module. It should be in a secured, yet hidden location. The most popular place that people put it is in the panel below the steering wheel. Putting it in this area allows it to connect directly to the ignition.
Next, remove the panel underneath the steering wheel to gain access to the wires that connect to the starter. Once you get to the wires, it’s imperative that you connect the wires securely. Any loose wiring could lead to damage to your vehicle or an injury. So make sure the connection is strong.
It helps to use heat shrink tubing and electrical tape. Attach the 12v constant wire to the power wire of your system. The 12v constant wire is the wire that’s connected to your battery and it’s usually located within a group of wires that are attached to the ignition switch.
If you read your car manual, it should tell you where this specific wire is. Next, attached the accessory wire. The accessory wire provides power for the heater and air conditioning control, and it provides energy to the 12v wire. Connect the accessory wire on the starter to the accessory wire on the car. To install this specific wire, attach it to the multimeter while the key is turned to the off position and the voltage is zero.
Find the Ignition Wire
The ignition wire provides power to the ignition system and the fuel pump, and it should connect to the ignition switch that’s located underneath the steering wheel. Again, check your car manual to get the information on where to locate this wire and find out its color. After you find the ignition wire, connect it to the multimeter while it still shows no voltage,and it’s connected to a ground wire.
The next step is to connect the parking light with the brake wires. The brake wire is typically located in the switch harness over the brake pedal. It may also be near the parking lights. Once you locate it, go ahead and connect it.
This is an essential step because connecting a brake wire is what prevents a thief from driving away in your vehicle while it’s running with the remote start function.
Connect the Tachometer Wire
Locate and connect the tachometer output that’s located on the remote sensor. Doing this step is mandatory because it helps to disengages the starter once the vehicle has started. The tachometer wire can be found by following the spark plug wires to where they gather at the distributor.
From there, you should see a tiny wire harness that should be labeled to show where the tachometer wire is. Again, you can look at your owner’s manual to get the exact location.
Once you’ve followed all of the steps listed in the remote starter instruction manual, be sure to secure the wires with wraps to keep them neat and organized. Doing so helps to protect the wires.
How Are Remote Starters Installed? Hire a Professional
Remote starters can be done by reading an instruction manual, but it’s best to get them installed by a professional. As you can see, there are a lot of intricate steps to remote start installation.
However, you can save yourself a lot of time and energy by relying on a professional to put the system together for you. For additional information, check out the highlighted link to learn more about expert remote start installation and all of its perks.
Also, it’s a good idea to use the same remote start system from the auto shop that you use. A lot of times, buying a remote start system and getting it installed elsewhere sometimes causes complications.
How Are Remote Starters Installed: No-Hassle Installation
Now that you’ve read the information above, you no longer have to ask the question of “How are remote starters installed”? The process of installation is a bit tricky, especially if you’re not good with mechanics.
But with that said, your best bet is to get your remote starter installed by a professional. That way, you can ensure that the job is done right and you don’t have to go through the headache and hassle of doing it yourself.
If this information was helpful, feel free to read more of our website. We provide tons of informative articles related to automotive information, beauty and fashion, sports, and more.
